TECO Motors

HP.33 hp through 10 hp Speed1800 RPM Voltage 115/230V, 230V Frequency 60 Hz.

Features

• High-Torque design for tough applications such as farm-duty
• 1.15 SF through 10 hp
• Oversized ball bearing
• Manual reset overload protector installed with rubber boots/gasket
• Rugged cast-iron frame and endbells 143T through 215T
• Oversized and gasketed conduit box
• Non-hygroscopic insulation system
• Zn-Cd plated hardware
• Dynamically balanced pressure die-cast aluminum rotor
• Ground terminals
• Condensation drain holes

HP1 hp through 400 hp Speed 3600, 1800, 1200 RPM Voltage 230/460V (usable on 208V), 460V, 575V Frequency 60 Hz.

Features

• HPE™ – High Pulse Endurance Wire
• Premium efficiency and high power factor
• Corrosion resistant hardware
• Lead lugs on 143T to 449T frame
• Neoprene lead separator
• F-1 and F-2 mounting interchangeability
• C-Flange, D-Flange and P-Base kits available for 254T to 449T frame
• Fully tested and documented per IEEE 112, Method B and NEMA MG-1
• Class B temperature rise
• CE Mark on Nameplate
• 1.15 service factor
• Suitable for 208V operation from 1HP to 125HP
• Suitable for wye-delta starting from 7.5HP to 400HP (12 leads for 7.5HP to 125HP, 6 leads for 150HP to 400HP)
• Suitable for Inverter Duty per NEMA MG1-31.4.4.2 – speed ranges 20:1 variable torque, 5:1 constant torque
• 6 Leads only on 575 Volt

HP300 hp through 500 hp Speed 3600, 1800, 1200 RPM Voltage 460V Frequency 60 Hz.

Features

• Design Standard: NEMA MG-1; MG-13; NEMA Design B, continuous duty
• Conversion Kits: C-Face, D-Flange
• Class F insulation with Class B temperature rise
• Cast-iron frame
• Cast-iron end bells and conduit boxes for all ratings
• Copper windings
• Oversized ball/roller bearings
• 40°C Ambient, 1.15 SF
• Full Voltage or Wye-Delta Starting
• Three Year Warranty

HP5 hp through 150 hp Speed 1200 RPM Voltage 230V, 460V, 796V Frequency 60 Hz.

Features

• NEMA Design D, 5-8% slip
• Cast-Iron Frame, End Brackets and Oversized Conduit Box
• Fully guarded with Rodent Screen
• Oversized Bearings selected for Belt-drive application
• Grounding Terminals on Frames and Inside Conduit Box
• Thermal Protectors embedded in Winding in each Phase
• Stainless Steel Nameplate
• F2 Mounting

HP.33 hp through 40 hp Speed 3600, 1800, 1200 RPM Voltage 230/ 460V (Usable on 200V and 208V) Frequency 60Hz

Features

• AC, 3 phase, 60 Hz, 208-230/ 460V, 1.15 SF
• NEMA Design B performance
• UL recognized Class F non-hygroscopic insulation system
• Class B temperature rise
• Multiple mountings for 56 and 140T; dual mountings for frame 180T~280T
• Interchangeable F1 and F2 mounting for frame 180T~280T
• Bi-directional rotation
• 90 degree rotatable oversized and gasketed conduit box
• Stainless steel nameplate
• Accepts C-face conversion kit
• Three year warranty
• Suitable for Inverter Duty per NEMA MG1-31.4.4.2 – speed ranges 20:1 variable torque, 5:1 constant torque

HP.33 hp through 2 hp Speed 3600, 1800, 1200 RPM Voltage 230/460V, (usable on 208V) Frequency 60 Hz.

Features

• Heavy Gauge Steel Frame With Condensation Drain Holes
• Ribbed Die-Cast Aluminum Endbells With Machined SteelBearing Seat and Shaft Slinger
• Large Size Double-Gasketed 90 Degree Rotatable Conduit Box
• Oversized Vacuum De-Gassed Ball Bearing
• High-Grade Insulated Electro-magnetic Steel Stator With Polyester Enameled Copper Wire
• Cast-Iron C-Face Kit For Rigid Base Mount Motors
• Cd-Zn plated Corrosive-Resistant Hardware

HP.75 hp through 50 hp Speed 3600, 1800, 1200 RPM Voltage230/460V (usable on 208V) Frequency 60 Hz.

Features

• Class F insulation with Class B temperature rise
• Cast iron frame and endbells
• Copper windings
• Oversized ball bearings
• Conversion Kits CHEM-DUTY Kits
• Continuous SF 1.15 or 1.0

HP3/4 hp through 800 hp Speed3600, 1800, 1200, 900 Voltage 230/460V (usable on 208V), 460V, 575V Frequency 60 Hz.

Features

• Inverter Duty Magnet Wire
• Non-hygroscopic, Class F insulation system
• High-grade, electro-magnetic steel laminations for low core loss and high efficiency
• All cast-iron construction including IP55 frame, end brackets, fan cover and conduit box for rigidity and excellent corrosion resistance
• Reinforced end turn lacing
• Neoprene lead separator
• High performance bearings of degassed steel
• 90° rotatable oversized cast iron conduit box for easy connection
• Corrosion-resistant non-sparking external fan
• Dynamically balanced pressure die-cast aluminum rotor
• Phenolic rust-proof base coat
• Round-body motors feature cast-iron drip cover
• Zn-Cd coated hardware
• CSA Certified for Class 1, Division II, Groups B, C and D, with Temperature Code T3C
• CSA and UL approved for Inverter Duty per NEMA MG1 Part 31, with speed range of 20:1 variable torque and 10:1 constant torque

HP1 hp through 300 hp Speed 3600, 1800, 1200 RPM Voltage 460V, 575V Frequency 60 Hz.

Electrical Features

• Designed to meet NEMA MG-1, MG-13
• Stock available in 460V and 575V; other voltages available upon request
• Premium efficiency; meets or exceeds NEMA PREMIUM, EPACT ‘ 92 and Canadian Federal Efficiency Levels defined in CSA C390-93; Full load efficiency of all ratings is certified under the EEV Program of the CSA
• Motors are NEMA Design “B” and “C” Torque
• UL recognized Class F non-hygroscopic insulation system with HPE™ (High Pulse Endurance) index, heavy heat resistance enameled copper wire ensures longer winding life and reliability
• CSA certified for Class1, Division 2, Groups B, C and D with Temperature Code T3C
• Class B temperature rise, 80°C rise by resistance method at 1.0 SF; 90°C rise at 1.15 SF
• 3 Leads solderless lug terminals

Mechanical Features

• Bearing temperature rise is below 45°C for all 4P and 6P ratings; 50°C for all 2P motors
• Sound power levels are below 85 dBA providing quiet operation
• Full cast iron construction: frame, brackets, fan cover and conduit box with IP55 rated protection
• Frame provided with two threaded drain holes with drain plugs and a drilled and tapped hole for a ground lug
• Corrosion-resistant cast iron conduit box has twice the volume required by NEMA; Conduit box is fully gasketed with NPT threaded conduit entry
• Regreaseable bearing construction with inner bearing caps prevent bearing contamination
• Non-sparking plastic or bronze fan
• All internal rotor, stator and shaft surfaces are cleaned and coated with moisture resistant varnish; Exterior is painted with zinc-chromate epoxy base with a blue finish
• Stainless steel hardware and nameplate
• Vibration will not exceed 0.08 inches per second
• Motors can be re-rated for 415, 400 and 380 volt 50 HZ
• CSA and UL approved for Inverter Duty per NEMA MG1 Part 31, with speed range of 20:1 variable torque and 10:1 constant torque

HP1 hp through 300 hp Speed 3600, 1800, 1200 RPM Voltage 460V, 575V Frequency 60 Hz.

Electrical Features

• Designed to meet NEMA MG-1, MG-13 and IEEE 841
• Stock available in 460V and 575V; other voltages available upon request
• Premium efficiency; meets or exceeds the requirements of EPACT ’92 and Canadian Federal Efficiency Levels defined in CSA C390-93; Full load efficiency of all ratings is certified under the EEV Program of the CSA
• UL recognized Class F non-hygroscopic insulation system with HPE™ (High Pulse Endurance) index, heavy heat resistance enameled copper wire insures longer winding life and reliability
• CSA certified for Class 1, Division II, Group B, C and D with Temperature Code T3C
• Class B temperature rise, 80°C rise by resistance method at 1.0 S.F.; 90°C rise at 1.15 SF
• 3 Leads solderless lug terminals
• Meets GM 7E-TA specifications

Mechanical Features

• Bearing temperature rise is below 45°C for all 4P and 6P ratings; 50°C for all 2P motors
• Sound power levels are below 85 dBA providing quiet operation
• Full cast iron construction: frame, brackets, fan cover and conduit box with IP55 rated protection
• Frame provided with two threaded drain holes with drain plugs and a drilled and tapped hole for a ground lug
• Corrosion-resistant, cast iron conduit box has twice the volume required by NEMA. The conduit box is fully gasketed with NPT threaded conduit entry
• Regreaseable bearing construction with inner bearing caps prevent bearing contamination
• Non-sparking plastic or bronze fan
• All internal rotor, stator and shaft surfaces are cleaned and coated with moisture resistant varnish; Exterior is painted with zinc-chromate epoxy base with a blue finish
• Stainless steel hardware and nameplate
• Vibration will not exceed 0.08 inches per second
• Motors can be re-rated for 415, 400 and 380 volts at 50 HZ
• CSA and UL approved for Inverter Duty per NEMA MG1 Part 31, with speed range of 20:1 variable torque and 10:1 constant torque