Hyundai Motors Hyundai Motors

Hyundai Premium Efficiency Motors

Rigid Base

Rigid Base
  • 1-250 HP
  • 3600, 1800 and 1200 RPM
  • 208-230/460 volt (1-125 HP)
  • 460 volt (150-250 HP)
  • TEFC enclosure
  • Dual rated service factor – 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation
  • Rigid base
  • Premium efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5 year warranty
  • NEMA Design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage (1-125 HP)
  • Suitable for wye-delta start (15-250 HP)
  • Inverter ready, 10:1 CT / 20:1 VT
  • Double drilled feet to accommodate mounting flexibility (324T-449T)
  • F2 field mountable
  • Class I, Division 2, Groups A, B, C, D
  • CC #038A

C-Face – Rigid Base

C-Face – Rigid Base
  • 1-200 HP
  • 3600, 1800 and 1200 RPM
  • 208-230/460 volt (1-125 HP)
  • 460 volt (150-200 HP)
  • TEFC enclosure
  • Dual rated service factor – 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation
  • C-face – rigid base
  • Premium efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5 year warranty
  • NEMA Design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage (1-125 HP)
  • Suitable for wye-delta start (15-200 HP)
  • Inverter ready 10:1 CT / 20:1 VT
  • Double drilled feet to accommodate mounting flexibility (324TC-449TC)
  • F2 field mountable
  • Class I, Division 2, Groups A, B, C, D
  • CC #038A

C-Face – Round Body

C-Face – Round Body
  • 1-40 HP
  • 1800 RPM
  • 208-230/460 volt
  • TEFC enclosure
  • Dual rated service factor – 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation
  • C-face – round body
  • Premium efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5 year warranty
  • NEMA Design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage (1-40 HP)
  • Suitable for wye-delta start (15-40 HP)
  • Inverter ready, 10:1 CT / 20:1 VT
  • F2 field mountable
  • Class I, Division 2, Groups A, B, C, D
  • CC #038A

Hyundai IEEE-841 Motors

Rigid Base

Rigid Base
  • 1 – 250 HP
  • 3600, 1800 and 1200 RPM
  • Single voltage, 460 volts
  • TEFC enclosure
  • Dual rated service factor – 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation with Class N varnish
  • Rigid base
  • Full compliance with IEEE-841, version 2009
  • Meets or exceeds EISA 2007 efficiency requirement defined in NEMA MG-1 table 12-12
  • Parker Hannifin ProTech IP66 labyrinth seals on both drive-end and opposite drive-end bearings
  • CSA Certified for Class I, Division II, Groups A, B, C, D
  • Inverter duty, 10:1 CT / 1000:1 VT
  • Inverter shield insulation and inverter grade magnet wire meets or exceeds NEMA MG-1 Part 31 for exceptional corona and transient protection
  • Class B temperature rise
  • IP55 degree of protection
  • NEMA design B torque
  • IEEE-841 motor test report supplied with each motor
  • 5 year warranty

C-Face - Rigid Base

C-Face – Rigid Base
  • 1 – 100 HP
  • 3600 and 1800 RPM
  • Single voltage, 460 volts
  • TEFC enclosure
  • Dual rated service factor – 1.15 for 40°C / 1.0 for 65°C
  • Class F insulation with Class N varnish
  • C-face – rigid base
  • Full compliance with IEEE-841, version 2009
  • Meets or exceeds EISA 2007 efficiency requirements defined in NEMA MG-1 table 12-12
  • Parker Hannifin ProTech IP66 labyrinth seals on both drive-end and opposite drive-end bearings
  • CSA Certified for Class I, Division II, Groups A, B, C, D
  • Inverter duty, 10:1 CT / 1000:1 VT
  • Inverter shield insulation and inverter grade magnet wire meets or exceeds NEMA MG-1 Part 31 for exceptional corona and transient protection
  • Class B temperature rise
  • IP55 degree of protection
  • NEMA design B torque
  • IEEE-841 motor test report supplied with each motor
  • 5 year warranty

Hyundai Explosion Proof Motors

Rigid Base

Rigid Base
  • 1-250 HP
  • 3600, 1800 and 1200 RPM
  • 208-230/460 volt (1-125 HP)
  • 460 volt (150-250 HP)
  • TEXP enclosure
  • 1.15 service factor
  • Class F insulation
  • Class B temperature rise
  • Rigid base
  • Premium Efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5 year warranty
  • NEMA design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage (1-125 HP)
  • Suitable for wye-delta start (15-250 HP)
  • Unique multiple rating system for 40° and 55°C ambient
    • 143T-215T: T2C at 40°C, T2B at 55°C, T4 when thermostat is connected
    • 254T-286T: T2D at 40°C, T2C at 55°C, T4 when thermostat is connected
    • 324T-444T: T3 at 40°C, T2D at 55°C, T4 when thermostat is connected
    • 445T-449T: T3 at 40°C, T2D at 55°C, T4 when thermostat connected and 1.0 SF
  • Class I, Division 1, Groups C & D, UL Certification
  • CC #038A
  • CSA Energy Certified

C-Face

C-Face
  • 2-100 HP, 1800 RPM
  • 75-100 HP, 3600 RPM
  • 208-230/460 volt
  • TEXP enclosure
  • 1.15 service factor
  • Class F insulation
  • Class B temperature rise
  • C-face – rigid base
  • Premium Efficiency, meets or exceeds EISA 2007 requirements defined in NEMA MG-1 table 12-12
  • 5 year warranty
  • NEMA design B
  • Cast iron frame and conduit box
  • Suitable for part winding start on low voltage
  • Suitable for wye-delta start (15-100 HP)
  • Unique multiple rating system for 40° and 55°C ambient
    • 143T-215T: T2C at 40°C, T2B at 55°C, T4 when thermostat is connected
    • 254T-286T: T2D at 40°C, T2C at 55°C, T4 when thermostat is connected
    • 324T-444T: T3 at 40°C, T2D at 55°C, T4 when thermostat is connected
    • 445T-449T: T3 at 40°C, T2D at 55°C, T4 when thermostat connected and 1.0 SF
  • Class I, Division 1, Groups C & D, UL Certification
  • CC #038A
  • CSA Energy Certified

Hyundai Severe Duty Large Frame Motors

Severe Duty Large Frame Motor
  • 250-600 HP
  • 3600, 1800 and 1200 RPM
  • Single voltage, 460 volt
  • Dual frequency rated 50/60 HZ nameplate
  • TEFC enclosure
  • IP55 degree of protection
  • Class F insulation
  • Class B temperature rise
  • Rigid base
  • Premium efficiency
  • 3 year warranty
  • Cast iron frame and conduit box
  • Heavy rolled steel fan cover
  • Ground lug in terminal box
  • Cast iron inner bearing caps
  • Double drilled feet
  • Bi-directional for 1800 and 1200 RPM ratings
  • Uni-directional (CCW) for 3600 RPM ratings, each motor shipped with extra fan for directional change
  • CSA Certified for Class I, Division 2, Groups A, B, C, D
  • Inverter ready, 10:1 CT / 20:1 VT
  • Inverter shield insulation and inverter grade magnet wire meets or exceeds • NEMA MG1 Part 31 for exceptional corona and transient protection
Motor

Ready to get started?

Contact us with your information. Our team will provide you with a customized quote.

Contact Us
NEMA EASA IEEE